Performance advantages of Stainless Steel H Beam​

Reasonable stacking, the first-in-first stacking criterion requires that the stacking is secured and safe, according to the type; standard stacking, different types of materials should be stacked separately: prevent thick turbidity and mutual corrosion prevention Store items that are corrosive to steel near the stacking location. The bottom of the stack should be high, stable and flat to prevent materials from being damp or deformed. Channel steel, I-beam and other section steels must have wooden mats or stones, and the stacking surface is slightly inclined to facilitate drainage, and pay attention to the material to be placed straight to prevent bending and deformation of the stacking height. Manual operations should not exceed 2m. , For mechanical operations, no more than 5m, and the width of the stack should not exceed 5m. There should be a fixed channel between the stack and the stack. The viewing channel is generally 0.5m. The income and expenditure channel depends on the size of the material and the conveying machinery, generally 5~ The height of the stack bottom is 0m. If the warehouse is on a sunny cement floor, the height is only 0.1m; it is a long-term operation; if it is a muddy floor, it must be raised by 0.2~0.5m. If it is an open place, the height of the cement floor is 0~3~0~5m, and the height of the sand and mud surface is 0.5~0.7m. The groove surface should not face up to prevent water rust. Angle steel, channel steel, I-steel maintenance material packaging and maintenance layer The preservative or other plating and packaging applied by the steel factory before leaving the factory is an important measure to prevent material corrosion When transporting Stainless Steel H Beam equipment, you must pay attention to maintenance during the loading and unloading process. It cannot be damaged and can extend the storage period of the material. The cross-sectional shape of Stainless Steel H Beam is specially researched for engineering load-bearing use, whether it is a beam. Its the column. Its section modulus is large, and its resistance to bending is good; its turning radius is large, and its pressure-bearing stability is good. To obtain solid square steel with mechanical properties equal to Stainless Steel H Beam is too wasteful, expensive and bulky; to obtain hollow square steel with mechanical properties equal to Stainless Steel H Beam supply, it still costs too much steel and is not cost-effective. The benefit of hollow square steel is only simple rods to achieve a more beautiful connection. Therefore, it is mostly used in the skeleton of the decoration project. Of course, square steel is better for load-bearing. When b=h, the specification is the same, and only the shape is considered, the square has more sides than the H shape, and the load-bearing talent will be 1/4 more, and it is more stable. However, after accounting and structural arrangements, H-shaped steel can achieve the function of square steel and is more economical.

source https://patabook.com/blogs/107454/Performance-advantages-of-Stainless-Steel-H-Beam